Vandy Vape Pulse 80W AIO Kit

Check out the Pulse AIO Kit below!
Pulse AIO Kit

Accessories:
Replacement Panels
Billi Billi Brand Replacement Panels (for Pulse AIO)
Vessel Kits
Vessel Replacements
Pulse AIO Button Rings
Pulse AIO DIY Accessories Kit

This Boro tank-compatible kit includes both a standard and DIY RBA pod. And, this all-in-one setup also features 80 watts by a single 21700/20700/18650 battery, a USB-C charging port, customizable buttons and plates, a high number of coil options, a multitude of safety protections, and a plethora of modes including temperature, voltage, variable wattage, and bypass.

The chipboard also allows for a safe vape experience. Not only will the device warn you when the battery is low, but it will also prevent open circuit, over-current, over-puff, short circuit, and high-temperature issues. which means you may feel safe whenever using this all-in-one setup.

In the design department, the Vandy Vape Pulse AIO kit is made of PC or ABS nylon, making it much lighter than any of the preceding devices such as the Pulse V2. So, really the heaviest part of this setup would be the battery. Six colors are available: frosted blue, frosted red, frosted black, frosted green, frosted white, and black.
The Pulse AIO includes both a pre-built 3.7ml pod, as well as an RBA pod that can hold 3.7ml of vape juice. Fortunately, the setup works with any VVC coils the pod can hold 5ml e-liquid,and has a side-fill port.

The kit also works with any Boro-compatible tank. To ensure all Boro tanks have a tight fit, you may adjust the height of the positive table to the required height.
A closer inspection of the RBA tank also indicates that airflow is curved, making it suitable for both small and large coil builds. You may adjust the air intake by rotating the ring underneath the deck.

• Size: 55.6 * 97.5 28.2mm
• Power range: 5-80W
• Operating Voltage: 3.2-4.2V
• Maxim Output Current: 32A
• Charging Input Voltage: 5 +/- 0.25V
• Resistance: 0.05-3.0ohm
• RBA Pod Capacity: 3.7ml
• Charging Current: 1000mah
• Boro compatible and tanks work in most boro style mods
• Pre-built Pod Capacity: 5ml

In the Box:

• 1pc Pulse AIO Device
• 1pc Pulse AIO Vessel Kit 
• 1pc Pulse AIO DIY RBA 
• 2pcs VVC Coils
• 2pcs 24ga Ni80 Coil .4 Ohms
• 1pc Wrench
• 1pc Coil Lead Guide
• 1pc 18650 Battery Adapter
• 1pc USB Type-C Cable
• 1pc Accessory Bag
• 1pc Instruction Manual